What's Included?

Forget "donors". We believe building your dream car should be fun and attainable (and shouldn't involve any trips to the junk yard.) Many of our included parts are considered "upgrades" with similarly priced kits. Complete your dream with the kit that includes all the pieces* you'll need to build a high-performance 427 Roadster.

The base model kit includes:

  • Hurricane 427 Frame
  • Fiberglass One-Piece Body
  • Fiberglass Doors, Trunk & Hood
  • Fiberglass Cockpit Tub
  • Fiberglass Trunk Liner
  • 4" Tachometer, 8000 RPM (Autometer)
  • 4" Speedometer, 180 MPH (Autometer)
  • 2" Oil Pressure, 100 PSI (Autometer)
  • 2" Water Temperature 60-140’ (Autometer)
  • 2"Oil Temperature 60-140’ (Autometer)
  • 2" Voltmeter, 8-18 V (Autometer)
  • 2" Fuel Level, 240-33 Ohms (Autometer)
  • Fuel Level Sender (Autometer)
  • 15 inch wood Steering wheel (Motolita)
  • Racing mirror
  • Horn button switch
  • Dash indicator light BLUE
  • Dash indicator light GREEN
  • Front marker lights (amber winged)
  • Seat belt bezels
  • Turn Signal Indicator switch
  • Shifter Handle
  • Bumper quick jacks
  • Shifter Knob
  • Side Louvers
  • Shifter boot
  • 6 bolt steering wheel boss
  • Roll bar
  • Upper and lower A arms.
  • Black vinyl seats.
  • Headers
  • Side exhaust pipes
  • 3/8 inch aluminum fuel line kit.
  • Upper Ball Joints
  • Front Spindles (pair)
  • Dust cap with spindle nuts
  • Rack Bushings
  • Steering rack and pinion
  • Tie rod ends
  • Weather strip 37'
  • Horn
  • License plate light
  • Rectangular tail lights
  • Door Latches
  • Hood handles & latches
  • Trunk handle & latch
  • Windshield assembly.
  • Windshield finish plates
  • Gas cap LeMans Style Flip Top
  • Gas Cap base
  • Rear view mirror
  • Hood prop rod
  • Trunk Prop
  • Lower Ball Joint
  • -3 AN to 3/16 inside flare (qty 2)
  • 3/16 Inv Flare Fem T
  • -3 AN to 3/16 brake line
  • 15" 90deg braided brake hose
  • 3/8 to 3 AN banjo
  • 3/8 24 Banjo bolt
  • 11" rotors - 5 bolt vented (front)
  • Rotor bearings, seals, dust cap, install hardware (front)
  • GM Metric calipers and brackets(front)
  • GM Metric brake pads (front)
  • 12" rotors - 5 bolt solid with integrated e-brake (rear)
  • SVO calipers with dust shields, brackets and integrated e-brake (rear)
  • SVO brake pads (rear)
 
  • Complete shortened 9" rear end with open diff (pre-assembled with new gaskets, bearings and seals)
  • 27" Aluminum racing radiator
  • Stainless steel braided front brake hose kit
  • Stainless steel braided 21" rear brake hose
  • Brake soft to hard clip (qty 4)
  • Brake line tab (qty 4)
  • Cushioned tubing clamps 3/16 (qty 10)
  • Cushioned tubing clamps 3/8 (qty 10)
  • Cushioned tubing clamps 1/2 (qty 10)
  • 3/16 Brake Line 12"
  • 3/16 Brake Line 20"
  • 3/16 Brake Line 30"
  • 3/16 Brake Line 51"
  • 3/16 Brake Line 72"
  • 3/16 Inv. Flare Union
  • Drivers seat track
  • E-brake boot
  • SVO Rear e-brake cables
  • Emergency handbrake (Chrome Lokar)
  • Seat belts 5 point harness (qty 2)
  • Clutch Slave Cylinder (wilwood)
  • Brake master cylinders (wilwood) (qty 2)
  • Clutch Master cylinder (wilwood)
  • Clutch/Brake pedal assembly (wilwood)
  • Adjuster RH Thread (A-Arm Ends) 1/2 ID Bushing
  • Gas Pedal
  • Gas Pedal Cable
  • Rear trailing arms 13 inch
  • Trailing arm heim joints 5/8" RH
  • Trailing arm heim joints 5/8" LH
  • Trailing arm brackets
  • Third link arm 5"
  • Third link bracket
  • Third link heim joints 5/8" RH
  • Third link heim joints 5/8" RL
  • Panhard bar (26 1/2 inches)
  • Panhard heim joints 5/8" RH
  • Panhard heim joints 5/8" LH
  • Header Tab Kit (qty 4)
  • Front Fully-adjustable Coilover Shocks & Springs (QA1)
  • Rear Fully-adjustable Coilover Shocks & Springs (QA1)
  • Steering tubing 18" 3/4 48 spline
  • Steering tubing 18" 3/4 DD
  • Collapsible shaft 24" 1 DD - 3/4 DD
  • Steering U-Joint 48 Spline to 3/4 DD
  • Steering U-Joint 3/4 DD to 1 DD
  • Steering U-Joint 9/16 -26 to 3/4 DD
  • Firewall Flange Bearing
  • Pillow-block Bearing (qty 2)
  • Shaft Collar
  • Battery Tray
  • Side vent louvers
  • Head light chrome bezel
  • Head light bucket
  • Complete Wiring harness. (includes fuse block, ignition, fan, hi/lo, headlight, extra toggle switches)
  • 16-inch high efficiency electric fan.
  • 17 gallon Poly gas tank with straps
  • Battery cables, terminals
  • Black carpet
  • Grade 8 Fasteners (bolts, nuts, washers etc.)

* Parts you will need to provide to finish the car: Engine, Transmission, Driveshaft, Wheels & Tires, Paint, and a Battery.

Owners/Assembly Manuals
Coming Soon!